The 1MM-R-D08-VS-00-H-TBP: The 1.00 mm pitch on this AMPMODU 1MM receptacle sets the board footprint for a 16-position, dual-row interconnect. At 1 A per contact, the current ceiling is squarely in the signal-level range — fine for low-power logic, sensor inputs, or control lines where the per-circuit draw stays under a few hundred milliamps. The 30 VAC rating and 1 A per contact match the typical signal bus on a 3.3 V or 5 V logic board. Don't push it near the ceiling on all 16 circuits simultaneously — the derating curve in the product drawing is your friend if ambient temperature climbs above 85°C.
SMT Termination and Pick-and-Place Ready
Surface-mount termination with a Pick and Place feature means this receptacle is designed for automated assembly — no hand-soldering, no through-hole wave process. The 0.130" (3.30 mm) insulation height gives a low profile above the board — useful when the mezzanine stack height is tight.
It is ROHS3 compliant.