TE Connectivity AMPMODU MTE header, 24 positions, 1-row, 0.100" (2.54 mm) pitch, shrouded 4-wall, male pin, press-fit/solder termination, gold mating finish, UL94 V-0, -65°C~105°C, 3 A.
| Parameter | Value |
|---|---|
| Series | AMPMODU MTE |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Latch Holder |
| Current rating | 3A |
| Operating temperature | -65°C~105°C |
| Contact material | Brass |
| Insulation color | Black |
| Insulation height | 0.535\" (13.60mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Tube |
| Features | Keying Slot |
| Shrouding | Shrouded - 4 Wall |
| Termination | Press-Fit, Solder |
| Applications | Automotive, General Purpose, Medical, Telecommunications |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 24 |
| Contact finish - post | Tin-Lead |
| Contact length - post | 0.130\" (3.30mm) |
| Overall contact length | 0.545\" (13.84mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The press-fit interface holds position during wave solder without secondary retention. Brass square pins, tin-lead plated on the post (100 µinch), gold on the mating end. The tin-lead post is compatible with leaded solder processes; for lead-free reflow, confirm the post finish with your assembly house.
No official second-source cross-reference is registered from the manufacturer.
The mating pitch is 0.100" (2.54 mm), single-row, 24 positions all loaded.
The contact finish on the post is tin-lead, which is not RoHS compliant for lead content. Verify the full RoHS status with the manufacturer or your compliance team before use in RoHS-restricted assemblies.
This header mates with the AMPMODU MTE receptacle housing (same series, 24-position, 0.100" pitch). The shrouded 4-wall and keying slot ensure correct orientation; the latch holder locks the pair together.
No — the lifecycle status is Active. No successor part number has been issued by TE Connectivity.