Skip to main content
TE Connectivity AMP Connectors 2-1445050-5 — Pin Headers

2-1445050-5 TE Connectivity Micro MATE-N-LOK Header 5 Pos

MPN2-1445050-5
Active

TE Connectivity AMP Connectors Micro MATE-N-LOK header, 2-1445050-5, 5 positions, single row, 3.00mm pitch, shrouded - 4 wall, locking ramp, press-fit/solder termination, through hole, tin contacts, UL94 V-0, -40°C ~ 105°C.

$1.4200Ref. price · indicative, final on quote
RoHSROHS3 Compliant
SeriesMicro MATE-N-LOK
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2-1445050-5 key specifications
ParameterValue
SeriesMicro MATE-N-LOK
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating250V
Current ratingVaries by Wire Gauge
Operating temperature-40°C ~ 105°C
Contact materialBrass
Insulation colorBlack
Insulation height0.364\" (9.25mm)
Insulation materialPolyamide (PA), Nylon

All specifications

2-1445050-5 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTray
FeaturesBoard Guide
ShroudingShrouded - 4 Wall
TerminationPress-Fit, Solder
ApplicationsGeneral Purpose
Contact shapeSquare
Rows1
Pitch0.118\" (3.00mm)
Positions5
Contact finish - postTin
Contact length - post0.125\" (3.18mm)
Contact finish - matingTin
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

Press-fit termination and board mounting

The termination is listed as both press-fit and solder, meaning the through-hole tails can be pressed into a plated hole for a gas-tight interference fit without reflow, or soldered conventionally. A board guide feature on the header aids alignment during automated placement, reducing skew on the pick-and-place line.

Contact plating and current rating

Frequently asked questions

What is the pinout and orientation of TE 2-1445050-5?

This is a single-row, 5-position header with all positions loaded. It mounts vertically (through hole) and mates with a Micro MATE-N-LOK receptacle via the shrouded 4-wall housing. The locking ramp is on one side of the shroud; the board guide is on the opposite side.

What is the compatible mating housing for 2-1445050-5?

The mating half is a Micro MATE-N-LOK receptacle housing (e.g., TE 1-1445050-5 or similar 5-position female housing) that accepts the corresponding crimp terminals. The locking ramp on the header engages with the latch on the receptacle for a secure connection.