Panel-Mount Plug Housing for Dynamic D-3200 Harnesses
It uses a 5.08mm pitch and dual-row layout with 0.300" (7.62mm) row spacing, giving enough room between circuits for the 20-16 AWG crimp terminals this series typically accepts. The housing carries a polarizing key to prevent mis-mating with the wrong receptacle — a practical safeguard in multi-connector panels where identical-looking housings sit side by side.
What the 5.08mm Pitch and Dual-Row Layout Mean for the Fit
The 5.08mm pitch is the defining board-layout dimension for the mating header — it sets the pad spacing on the PCB. The 0.300" (7.62mm) row spacing means the connector body is wider than a single-row equivalent, which matters for enclosure cutouts and panel clearance.
A missing contact line on the BOM is the kind of delay that stops a harness build cold.
No obsolescence notice or last-time-buy window is on record. The Dynamic D-3200 series has broad installed base, so second-source options exist through the same TE distribution network.