M8 Plug for Sealed Sensor and Actuator Connections
It carries a 4A current rating at 60V, with gold-plated mating contacts for corrosion resistance over repeated mate cycles. The threaded fastening and IP67 ingress protection — Dust Tight and Waterproof — are only valid when the plug is fully mated and the coupling ring is torqued. An unmated open half loses the seal, so cap the receptacle side during service intervals if the environment sees washdown or condensation.
This plug terminates via solder cups to the PCB and mounts through a panel hole with the bulkhead feature, then secures with the threaded nut. The board guide and board lock features on the PCB footprint align the connector during reflow and hold it against vibration once soldered. The right-angle body keeps the cable run low-profile against the panel face. The gold contact finish handles the mating cycles expected in field-serviceable connections without fretting corrosion.