10-position, 2.00 mm pitch — board footprint and mating half
The 2-2232826-0: This Grace Inertia 2.0 header carries 10 positions on a single row at 2.00 mm pitch — the spacing that sets the PCB drill pattern and the receptacle it mates with. Rated 2 A per contact at 50 VAC, it is a signal-level interconnect, not a power bus. The 4-wall shrouding protects the male pins from bending during handling, and the latch holder keeps the mated pair locked against vibration.
Through-hole kinked-pin termination
The kinked solder posts hold the header in place during wave solder and resist pull-out from cable strain on the mating side.
RoHS compliant.
If your BOM calls for 10 positions at 2.00 mm, the 2-2232826-0 is the direct fit; the 1376366-8 is a different footprint and won't mate without a board spin.