Skip to main content
Log in
TE Connectivity AMP Connectors 2-2296207-2 — Connector Housings

TE VAL-U-LOK 2-2296207-2, 22-Pos Plug Housing 4.20mm

MPN2-2296207-2
Active

TE Connectivity VAL-U-LOK plug housing, 22 positions, 2 rows, 4.20mm pitch, panel mount snap-in, locking ramp, natural nylon, glow wire compliant, crimp termination, contacts not included.

$0.6700Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 2-2296207-2 datasheet (PDF)
RoHSROHS3 Compliant
SeriesVAL-U-LOK
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

2-2296207-2 specifications
ParameterValue
SeriesVAL-U-LOK
TypeMale Pin
MountingPanel Mount, Snap-In
Connector typePlug
Fastening typeLocking Ramp
Operating temperature-40°C ~ 105°C
ColorNatural
Insulation materialPolyamide (PA), Nylon
NoteContacts Not Included
Pitch0.165\" (4.20mm)
PackageBulk
FeaturesGlow Wire Compliant
Row spacing0.165\" (4.20mm)
Rows2
Contact terminationCrimp
Positions22

Product details

22-Circuit Dual-Row Plug Housing for Wire-to-Board Harnesses

The TE Connectivity VAL-U-LOK 2-2296207-2 is a 22-position, dual-row plug housing on a 4.20 mm pitch.

What Bolts In — Mating Half and Contact Selection

The housing accepts TE's VAL-U-LOK crimp terminals (male pin contacts, typically 20-24 AWG wire range), which must be ordered under a separate part number; the housing alone has no conductive path. Confirm the BOM line includes both the housing and the correct quantity of crimp contacts before the harness build starts. Panel mounting is snap-in — the housing clips into a rectangular cutout in the panel or enclosure wall, no hardware needed. The locking ramp faces the panel side, so the mating header slides in from the opposite direction and the latch catches the housing edge. Verify the panel thickness against the housing's retention feature spec in the product drawing; typical VAL-U-LOK snap-in housings accept 1.0-2.0 mm panels.

Frequently asked questions

Where can I buy 2-2296207-2 and what is the lead time?

Submit an RFQ for your BOM quantity to get a firm delivery commitment.

What contacts are used with 2-2296207-2?

The housing accepts TE VAL-U-LOK male pin crimp contacts, typically for 20-24 AWG wire. Contacts are not included with this housing — order them separately as a line item on the BOM. The exact TE contact part number depends on wire gauge and plating preference; consult the VAL-U-LOK product family datasheet for the terminal that matches your wire size.

Is 2-2296207-2 glow wire compliant?

Yes, this housing carries the Glow Wire Compliant feature designation, meeting the glow-wire ignition test requirements of IEC 60335-1 for appliance applications.

What is the mating connector for 2-2296207-2?

The mating half is a TE VAL-U-LOK receptacle header with 22 positions, 2 rows, 4.20 mm pitch, and a locking ramp feature. The header is typically a right-angle or vertical through-hole PCB mount part from the same series.