What This 10-Position Grace Inertia SGI Plug Housing Does
The TE Connectivity 2-2350224-0 is a 10-position, single-row plug housing from the Grace Inertia SGI series, designed for free-hanging wire-to-board or wire-to-wire harness applications. It uses a 2.00 mm pitch and a latch holder fastening system that gives an audible click when fully mated, providing vibration resistance in automotive and industrial environments. This is a crimp-style housing — contacts are ordered separately and must be crimped onto the wire before insertion.
Pitch and Position Count — The Fit Check
The 2.00 mm pitch is the first thing to verify against your board layout or mating connector. This is a tighter pitch than the 2.50 mm of the 1-1376477-6 sibling, which means the board footprint and the mating receptacle must match exactly — there is no interchangeability between the two pitch families.
Contacts Are Not Included — Order Separately
This housing ships empty. The note "Contacts Not Included" is the most common trip point on this series — you must order the matching female crimp socket terminal separately. The housing accepts a crimp terminal (TE part number not specified in this listing), so confirm the terminal part number against your wire gauge before committing the BOM. The crimp termination is standard for field-assembled harnesses where the wire is terminated before insertion into the housing.
Latch Holder and Environmental Rating
The latch holder fastening type provides a positive mechanical lock between the plug and the mating receptacle. In a harness that sees vibration — think engine bay or industrial cabinet — this latch prevents the connector from walking loose over time.