2.00 mm pitch, 3-position shrouded header for wire-to-board
It mates with CT crimp-socket housings for a board-to-cable/wire connection.
Through-hole termination with kinked solder tails
Kinked pin, solder termination — the kink provides a press-fit retention in the plated through-hole before wave solder, preventing the header from floating during the process.
Active production, no single-vendor lock
The CT series is widely second-sourced, so the BOM is not locked to a single vendor.
Mates with TE CT series crimp-socket housings (e.g., 1-292132-x or 2-292132-x receptacles) that accept 20-24 AWG wire with the matching crimp terminal. The 4-wall shroud guides the housing straight on and prevents stubbing. Insulation height of 0.268" (6.80 mm) leaves clearance for the mating housing latch and wire exit.