The TE 2-292215-6 is a 6-position plug-to-plug adapter from the Mini CT series, designed as an inline interconnect where both ends terminate with male pins. Both ends are identical (Plug, Male Pins), making this a gender-changer or extension adapter rather than a standard header or receptacle. Mounting is panel mount, snap-in — the adapter clips into a panel cutout without separate hardware, retained by integral latches on the housing. This suits applications where the adapter needs to be fixed to a chassis or enclosure wall rather than floating free in a harness.
What the 1.50mm Pitch Means for Your Layout
At 1.50mm pitch, the 6 positions fit in a single row spanning about 7.5mm across the contacts. That's compact enough for tight panel layouts but demands precise alignment of the mating half — the narrow spacing leaves little float for misalignment. The snap-in mounting helps here: once the adapter is fixed to the panel, the mating connector aligns to a known datum. Compared to the 5-position variant (2-292215-5), the 6-position version adds one circuit at the same 1.50mm pitch. The panel cutout and mounting footprint are identical — only the contact count changes.