24-Position Dual-Row Header at 2.00mm Pitch
The 2-292252-4: The 0.256" (6.50mm) row spacing provides ample room for PCB trace routing between rows.
Through-Hole Termination and PCB Fit
The solder posts are 0.126" (3.20mm) long, suitable for standard 1.6mm-thick PCBs with through-hole soldering.
It ships in tray packaging, which is typical for through-hole headers of this size — the trays stack cleanly on the pick-and-place line if the machine supports tray feeders, or the parts can be hand-placed for lower-volume builds.
Comparison with Single-Row Sibling 1-292164-1
The closest functional sibling in the CT series is the 1-292164-1, a single-row, 11-position, right-angle version of the same 2.00mm-pitch header. The 2-292252-4 offers more than double the circuit count (24 vs 11) in a dual-row layout, and its vertical orientation keeps the cable exit perpendicular to the board rather than parallel. Both use tin-plated brass contacts and a detent lock, so the mating receptacle and crimp terminals are shared across the series. The choice between them is driven by the required position count and the cable exit direction needed for the enclosure layout.