Receptacle Housing for Sealed Harness Applications
The gray PBT, glass-filled housing is rated for free-hanging (in-line) mounting, and the sealed construction keeps moisture and contaminants out of the connection — critical for underhood or exposed harness runs.
Sealed Housing — No Terminals Included
The locking ramp on the mating plug provides audible and tactile confirmation of full engagement, and the sealed interface means no secondary boot or heat shrink is required at the joint.
This receptacle mates with the Junior Power Timer plug housing (male tab contacts), also from the same series. The crimp terminals for this housing are the standard Junior Power Timer female sockets — verify the wire gauge range and plating (tin vs. gold) against your application's current and cycle-life requirements. The locking ramp on the plug side engages with the ramp on this receptacle to prevent accidental unmating under vibration.
