A Poke-In Wire Receptacle That's Now Obsolete
The TE Connectivity 2213301-1 is a 1-position, surface-mount, right-angle receptacle using a poke-in wire termination. It's a board-to-cable/wire interconnect, meaning a stripped wire is inserted directly into the housing and held by an internal spring contact — no crimp terminal required. The white LCP housing accepts 18 AWG, 20 AWG, or 22 AWG wire, and the tin-plated copper alloy contacts are rated for 5A or 9A at 600V, depending on the wire gauge and operating conditions.
Why the Dual Current Rating Matters for Wire Selection
For a harness designer, this means the wire gauge directly sets the current headroom; using 18 AWG wire is necessary to reach the full 9A per circuit.
Obsolete — Sourcing the 2213301-1 Today
The 2213301-1 is officially listed as Obsolete. There is no documented replacement or cross-reference from TE Connectivity for this specific order code. For a BOM line that requires this part, the only channel is the surplus or broker market. No official successor part number is on record.