3-Position Sealed Plug Housing for Socket Contacts
The TE Nector M 2213428-1 is a 3-position plug housing designed to accept socket contacts for cable-to-cable or cable-to-board interconnects.
For BOM lines specifying this part, the only sourcing path is through the surplus or broker channel. No direct cross-reference or pin-compatible alternative is on record.
This is a plug housing for socket contacts — it does not include contacts. The mating half is a Nector M receptacle housing (with pin contacts). Termination is crimp-style; the user selects the appropriate socket contact (not supplied) and crimps it to the wire before inserting into the housing. The keyed feature ensures correct orientation during mating. The IP67 rating holds only when the housing is mated with its receptacle and the contacts are fully seated with the seal in place.
20A at 400V — Power Interconnect for Sealed Environments
The 20A per-circuit rating at 400V positions this housing for power distribution in sealed industrial or outdoor equipment — think lighting, sensors, or control cabinets where moisture ingress is a concern. The IP67 seal protects against temporary submersion, so it suits washdown areas or exposed harness runs. The 3-position count is typical for single-phase power plus ground or a simple signal/power combo. The glass-filled PBT housing provides the mechanical strength and flame resistance needed for enclosure-mounted or free-hanging harnesses.