Board-to-Board Sizing and Layout Fit
The 0.177" (4.50 mm) insulation height gives a moderate stack height for mezzanine or parallel-PCB configurations. The tin-plated posts (118.1 µin) are compatible with standard SMT solder processes.
Termination is solder-only — this is a surface-mount receptacle, not a crimp or press-fit part. The pick-and-place feature enables automated assembly; the LCP insulation withstands lead-free reflow profiles. The female socket contacts accept a mating male header (not included) with square pins. Confirm the mating header's pitch (2.00 mm), pin count (3), and orientation before committing to the BOM.
Confirm the reel quantity and lead time at RFQ — no stock-holding claim here; sourced per your BOM line.
Comparing Against a Peer Alternative
The closest functional peer is TE 1376775-3: also 3 positions, gold mating finish, and an active lifecycle. Key differences: 1376775-3 uses a box package (not tape & reel), has a higher current rating (3 A vs 2 A), a higher voltage rating (250 VAC vs 125 V), and thicker gold on the mating face (8.00 µin vs 3.94 µin). If your assembly line is set up for tape & reel and the 2 A/125 V rating is sufficient, 2307813-3 is the direct fit.