The 2314846-4: This is a 4-position, dual-row AMPMODU receptacle with a 2.00 mm mating pitch and a 0.177" (4.50 mm) insulation height. The tin-plated solder tails (118.1 µinch / 3.00 µm) are designed for SMT reflow; the pick-and-place feature means the reel or tube packaging is compatible with automated assembly.
No stock-holding claim; quoted per RFQ.
Mating and Termination: What Crosses into the Harness You've Got
This is a receptacle — bottom or top entry — meaning it accepts a mating pin header from either side of the board. The push-pull fastening (no latch) means the unmating force is low; in a vibration environment, a locking header or a dab of thread-locker on the board standoffs is worth considering. The tin post finish is for the solder joint; it's not rated for repeated mating. If you're re-pinning on site, the terminal is not field-replaceable — the whole receptacle is replaced.