Active Sourcing for the 5-Position AMPMODU Receptacle
Board-to-Board Signal Interconnect with 2.00 mm Pitch
This is a 5-position, single-row female socket receptacle with a 2.00 mm mating pitch — the footprint demands a matching 2.00 mm pin header, and the single row keeps the board edge narrow for dense layouts.
Through-Hole Termination and Push-Pull Retention
Termination is solder to through-hole posts (0.106" / 2.69 mm post length) — the technician can hand-solder or wave-solder it on site with a standard iron, no special tooling required. Fastening is push-pull, meaning the receptacle mates with a header by simple axial force and releases with a straight pull — no latch to break in the field, but also no vibration lock, so this suits low-vibration environments like test equipment or control panels.
Cross-Reference: 1376775-2 vs 2314876-5
The 2314876-5 runs 2 A at 125 V with a 3.94 µinch gold mating finish and LCP housing — a signal-duty choice where current margin is less critical than the higher-temperature LCP material.
The base product number is 2314876 — the full datasheet and product drawing are available from TE under that base number.