TE Connectivity Dynamic D-2970 series header, 3-position, 5.00mm pitch, right-angle through-hole, shrouded 4-wall, tin-plated male pins, board-to-cable/wire style.
| Parameter | Value |
|---|---|
| Series | Dynamic D-2970 |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Push-Pull |
| Voltage rating | 300V |
| Current rating | Varies by Wire Gauge |
| Operating temperature | -55°C~105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.346\" (8.80mm) |
| Insulation material | Liquid Crystal Polymer (LCP) |
| Parameter | Value |
|---|---|
| Style | Board to Cable/Wire |
| Package | Bulk |
| Features | Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Rectangular |
| Rows | 1 |
| Pitch | 0.197\" (5.00mm) |
| Positions | 3 |
| Contact finish - post | Tin |
| Contact length - post | 0.102\" (2.60mm) |
| Contact finish - mating | Tin |
| Contact finish thickness - mating | 39.4µin (1.00µm) |
The 2336491-3: The 5.00 mm pitch (0.197") is wide enough to route a moderate-current trace between pads without necking down the copper — typical for power distribution on a 2-layer board.
The closest functional sibling is 1394090-1 — same right-angle through-hole, same 4-wall shroud, same tin plating, but 6 positions at 2.85 mm pitch instead of 5.00 mm. If your board has the space for the wider pitch, the 3-position 2336491-3 gives better per-contact current headroom.
Yes, it is ROHS3 compliant.