8-Pin, 2.00mm Pitch Breakaway Header — Footprint and Fit
The 2.00mm pitch sets the board footprint — each pin center-to-center spacing is 0.079 inches, which mates with standard 2.00mm pitch receptacle housings. The insulation height of 0.059 inches (1.50mm) keeps the header low-profile on the board.
It is ROHS3 compliant. No stock-holding claim — quoted per RFQ.
Mates with any standard 2.00mm pitch unshrouded receptacle — typically AMPMODU or compatible series using square 0.64mm pins. The breakaway construction allows snapping to length if fewer than 8 positions are needed; all positions are loaded from the factory. Termination is through-hole solder. The square pin cross-section (0.64mm typical for 2.00mm pitch) provides good solder fillet formation.