Board Layout Fit: 2.00 mm Pitch, 6 Positions, SMT
The 2373376-6: The 0.079" pitch is tighter than the legacy 0.100" standard, so the board footprint leaves more routing room between pads — useful when signal traces need to escape under the connector body. All 6 positions are loaded, meaning no blank spots to track in the BOM. The SMT termination and detent lock suit it for a board-to-board or cable interconnect where the mated pair sees vibration.
The 2 A ceiling is typical for signal-level circuits — think sensor inputs, control signals, or low-power I/O in an industrial cabinet. The wide temperature range means the header can sit in an outdoor enclosure or near a motor drive without derating for ambient heat. The gold mating finish (3.94 µinch) on a copper alloy contact gives stable contact resistance over repeated mating cycles — relevant if the board is a field-replaceable module that gets swapped during maintenance.
Housing and Compliance: UL94 V-0, ROHS3, Active
The insulator is black, and the shrouded 2-wall design protects the pins from accidental shorting during handling.