TE Connectivity AMPMODU, Header Breakaway, 2 circuits, 2.00mm pitch, unshrouded, male pin, through-hole right-angle, gold mating finish, 2A, 125VAC/DC, UL94 V-0
| Parameter | Value |
|---|---|
| Series | AMPMODU |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Voltage rating | 125VAC/DC |
| Current rating | 2A |
| Operating temperature | -40°C~125°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.059\" (1.50mm) |
| Insulation material | Thermoplastic |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Board |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 2 |
| Contact finish - post | Tin |
| Contact length - post | 0.110\" (2.79mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.157\" (4.00mm) |
| Contact finish thickness - post | 78.7µin (2.00µm) |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
The 2842123-2: Rated 2A per contact at 125VAC/DC, with a gold mating finish 15.0µin thick — sufficient for repeated mating cycles in signal-level interconnects where contact fretting is a concern.
The insulation height is 1.50mm, so the header sits low against the PCB after soldering. This is typical for breakaway headers where the user snaps off the desired circuit count from a longer strip.
This unshrouded header mates with AMPMODU 2.00mm pitch receptacle housings and crimp sockets. The 2-position single-row layout is compatible with the matching TE socket part numbers in the same series — confirm the circuit count and pitch match before ordering.