TE Connectivity AMPMODU, 6-position unshrouded breakaway header, 2.00 mm pitch, dual-row, through-hole, gold-plated male pins, 2 A per contact, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | AMPMODU |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Voltage rating | 125VAC/DC |
| Current rating | 2A |
| Operating temperature | -40°C~125°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.059\" (1.50mm) |
| Insulation material | Thermoplastic |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Board |
| Package | Tube |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 6 |
| Row spacing - mating | 0.079\" (2.00mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.110\" (2.79mm) |
| Overall contact length | 0.327\" (8.30mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.157\" (4.00mm) |
| Contact finish thickness - post | 78.7µin (2.00µm) |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
The 2842127-3: The 2.00 mm pitch on this 6-position, dual-row header sets the board footprint tighter than the legacy 2.54 mm standard — useful when routing traces between pads on a dense PCB.
The 1376779-2 also carries a thinner 8.00 µinch gold mating finish versus 15.0 µinch here — the thicker gold on the 2842127-3 gives it an edge in mating cycle life for field-service applications.
The mating pitch is 0.079" (2.00 mm), with the same row spacing. This is the board footprint dimension to match when selecting the mating receptacle or designing the PCB layout.
Yes, the header is unshrouded — no shroud wall or polarisation key.
It is a Header, Breakaway — a through-hole male pin header intended for board-to-board or wire-to-board interconnects. The breakaway feature lets the user snap the pin strip to the required position count.
1376779-2 is a functional alternative from the same AMPMODU series: same 2.00 mm pitch, dual-row, unshrouded format. It carries a higher current rating (3 A vs 2 A) and a higher voltage rating (250 VAC vs 125 VAC/DC), but a thinner gold mating finish (8.00 µinch vs 15.0 µinch). Verify the BOM's current and voltage requirements before substituting.