2.00 mm Pitch, 10 Positions, Dual-Row Breakaway
This is the orientation you want when the board stack is tight on z-height and the cable or mezzanine board enters from the edge — common in compact industrial controllers and telecom line cards. The solder tails are 0.110" (2.79 mm) long, which is a standard through-hole length for 1.6 mm boards.
Gold Mating Finish, 2 A per Contact
Current rating is 2 A per contact. The voltage rating is 125 VAC/DC, which covers most low-power signal and logic-level circuits.
Active Production, Pick-and-Place Ready
No lead or restricted substances above the threshold — no extra paperwork needed for RoHS-regulated markets.
The 2842155-5 gives you 10 positions at 2.00 mm pitch — tighter pitch and more circuits in the same board edge. The trade-off is the unshrouded design: no polarization key, no latch, so the mating alignment depends on the board guide or the receptacle's own polarization.