4-position 2.00mm shrouded header with detent lock
The 292132-4 is a 4-position, single-row male pin header from TE's CT series, pitched at 2.00mm. Rated at 125VAC, with current capacity varying by wire gauge of the mating terminal.
Through-hole kinked-pin solder termination
Termination is through-hole with kinked pins — the kink provides a press-fit retention force during wave soldering, holding the header in place before the solder solidifies. The kinked pin design is standard for automated insertion equipment; the header ships in bulk, which means it feeds from a tube or tray, not tape-and-reel. The natural colour housing aids visual inspection of solder joints post-wave.