1.50 mm pitch right-angle header for compact wire-to-board
The 292206-7 is a 7-position, single-row header from TE's Mini CT series, designed for board-to-cable/wire connections. Its 1.50 mm pitch allows denser routing than standard 2.54 mm headers, saving PCB real estate in space-constrained designs. The right-angle through-hole termination directs the mating cable parallel to the board, suiting low-profile enclosures or edge-mounted connectors where vertical clearance is tight. A detent lock on the shroud provides a positive latching feel during mating, resisting accidental disconnection under vibration or cable tug.
Tin-plated contacts rated for signal duty
Both the mating and post contact finishes are tin, suitable for moderate mating-cycle applications (typically 25–50 cycles) in clean, indoor environments. The current rating varies by wire gauge, so the limiting factor is the attached wire, not the header itself. The 50 VAC voltage rating confirms this is a signal-level interconnect, not a power connector.