2.00 mm pitch, 2-position right-angle header with detent lock
It's a through-hole, right-angle design with a shrouded 3-wall housing and a detent lock that clicks the mating receptacle into place — no separate latch hardware needed. The 2.00 mm pitch is tighter than the common 2.54 mm (0.100-inch) standard, so the board footprint and the mating receptacle must match exactly — the CT series uses a dedicated crimp housing and terminal set.
Tin contacts, detent lock, and UL94 V-0 housing
Both the mating and post finishes are tin. The detent lock keeps the mated pair from backing apart under vibration or cable tug. The housing is polyamide 6/6 rated UL94 V-0 — it won't sustain a flame inside the equipment enclosure.
Sourced through independent distribution channels.