2.00 mm Pitch, 9-Position Right-Angle Header
Current Derating and Voltage Ceiling
For a typical 22-24 AWG signal circuit, expect 2-3 A per contact in still air, but the actual ceiling depends on the bundle fill and ambient temperature. Voltage rating is 125 VAC — this is the maximum continuous working voltage between adjacent contacts. For DC applications, the same peak voltage applies; the insulation system (PA66, UL94 V-0) provides basic spacing for 125 V peak in dry environments.
The 4-wall shroud on the 11-position part provides full pin protection on all sides, which matters if the connector sits near a board edge where side impact is possible. For a 9-circuit BOM, the 292253-9 is the direct fit. The 11-position sibling is a drop-in replacement only if the extra two positions are left unpopulated — the board footprint and keying are identical.