What This CT Series Adapter Does
The 292254-4: It mounts into a panel cutout with a snap-in fit, acting as a pass-through interconnect for wire-to-wire harnesses where both ends terminate in male plugs. Unlike a standard header or receptacle, this adapter takes two male plug ends — one on each side — so the harness designer uses it to bridge two sub-assemblies without adding a separate female-to-female coupler.
Pitch and Position Fit for the BOM
The 0.079" (2.00mm) pitch matches the standard CT-series footprint — if your existing harness uses CT receptacle housings or headers at this pitch, the 292254-4 adapter fits the same contact spacing. The 4-position count is fixed; a 2-position or 6-position CT adapter would be a different base number (292254-2 or 292254-6, same pitch).
Mounting and Termination Reality
Panel mount, snap-in — the adapter locks into a rectangular cutout without hardware. No soldering or crimping on the adapter itself; it's a pass-through body that accepts pre-terminated male plugs on both ends. The bag packaging means it ships loose, not on a reel.