6-Pin 2.00 mm Shrouded Header for Board-to-Board or Cable
The 2MM-HSP-D03-VT-02-H-TB is a 6-position, dual-row header from TE's AMPMODU 2MM series, on a 2.00 mm pitch. It's a shrouded, through-hole solder connector with male square pins and a latch holder for secure mating. The 30 µinch gold on the mating face supports repeated connect/disconnect cycles—rated for field-service duty where the connector sees regular unmating. Rated at 2 A per contact and 250 VAC, this header handles signal-level loads in board-to-board or cable-to-board links.
Shrouding and Latch Hold the Pair Together
The 2-wall shroud protects the pins from bending during blind mating, and the latch holder gives a positive mechanical lock—you should hear it click when the mating receptacle seats. In a vibration-prone environment like a panel with fans or a moving cable, that latch keeps the connection from backing out. A polarizing key is built into the housing, so the header can only mate with a correctly oriented receptacle—no risk of a reversed connection on the board.