Skip to main content
Log in
TE Connectivity AMP Connectors 2MM-HSP-D09-VT-02-H-TB — Pin Headers

2MM-HSP-D09-VT-02-H-TB TE Connectivity AMPMODU 2MM 18-Pin

MPN2MM-HSP-D09-VT-02-H-TB
Active

TE Connectivity AMPMODU 2MM series, 2MM-HSP-D09-VT-02-H-TB, 18-position dual-row shrouded header, 2.00 mm pitch, through-hole solder termination, gold-plated mating contacts, rated 2 A per circuit at 250 VAC.

$3.6700Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 2MM-HSP-D09-VT-02-H-TB datasheet (PDF)
RoHSROHS3 Compliant
SeriesAMPMODU 2MM
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

2MM-HSP-D09-VT-02-H-TB key specifications
ParameterValue
SeriesAMPMODU 2MM
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typeLatch Holder
Voltage rating250VAC
Current rating2A
Operating temperature-40°C ~ 105°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.217\" (5.51mm)
Insulation materialThermoplastic

All specifications

2MM-HSP-D09-VT-02-H-TB additional specifications
ParameterValue
Material flammability ratingUL94 V-0
StyleBoard to Board or Cable
PackageTube
FeaturesPolarizing Key
ShroudingShrouded - 2 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.079\" (2.00mm)
Positions18
Row spacing - mating0.079\" (2.00mm)
Contact finish - postTin
Contact length - post0.110\" (2.80mm)
Overall contact length0.327\" (8.30mm)
Contact finish - matingGold
Contact length - mating0.157\" (4.00mm)
Contact finish thickness - post12.0µin (0.30µm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

2.00 mm pitch, 18 positions, dual-row layout

The 2MM-HSP-D09-VT-02-H-TB: This is an 18-position, dual-row shrouded header from the AMPMODU 2MM series. The dual-row arrangement keeps the connector width at roughly 18 mm, fitting dense board-edge layouts without crowding adjacent components.

Latch holder and 2-wall shrouding for vibration resistance

Board-to-board or cable flexibility

The style is listed as board to board or cable, meaning this header can mate with either a board-mounted receptacle (for mezzanine stacking) or a wire-to-board housing with crimp terminals. This gives the layout engineer routing flexibility: run traces to a board-edge connector for a cable harness, or stack two PCBs with a matching receptacle on the secondary board.

Frequently asked questions

Is 2MM-HSP-D09-VT-02-H-TB RoHS compliant?

Yes, it is ROHS3 compliant, meeting the current EU directive on hazardous substances.