TE Connectivity AMP Connectors Micro MATE-N-LOK header, 3-1445093-0, 10 positions, 1 row, 3.00 mm pitch, through-hole, shrouded 4-wall, gold-plated male pins, locking ramp, press-fit/solder termination, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | Micro MATE-N-LOK |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Locking Ramp |
| Voltage rating | 250V |
| Current rating | Varies by Wire Gauge |
| Operating temperature | -40°C ~ 105°C |
| Contact material | Brass |
| Insulation color | Black |
| Insulation height | 0.364\" (9.25mm) |
| Insulation material | Polyamide (PA), Nylon |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tray |
| Features | Board Guide |
| Shrouding | Shrouded - 4 Wall |
| Termination | Press-Fit, Solder |
| Applications | General Purpose |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.118\" (3.00mm) |
| Positions | 10 |
| Contact finish - post | Tin |
| Contact length - post | 0.125\" (3.18mm) |
| Contact finish - mating | Gold |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The 3-1445093-0: The 3.00 mm pitch on this 10-position single-row header sets the board footprint and the per-contact current ceiling — at the rated current, temperature rise stays within the polyamide housing limit. The 0.125" (3.18 mm) post length gives enough solder-joint standoff for wave-solder cleaning.
Tin on the post keeps the solder-joint cost down without compromising the signal path.
The pitch is 0.118" (3.00 mm) on a single-row, 10-position header.
Yes, it is RoHS compliant.
This is a Micro MATE-N-LOK header; it mates with the corresponding Micro MATE-N-LOK receptacle housing and crimp terminals. The receptacle part numbers are in the same series — confirm the circuit count and keying before ordering.
This part is sourced through independent distribution channels.