7.92mm pitch, 2-position header for power and industrial wiring
The wide pitch allows for larger-gauge wire and higher current capacity than typical signal headers, and the tab contacts and latch holder provide a secure, vibration-resistant mate with the matching receptacle. The latch holder fastening ensures the connector stays mated under shock and vibration, making it suitable for industrial equipment and control panels.
Press-fit or solder termination for backplane or board assembly
The termination is listed as both press-fit and solder, meaning the same header can be pressed into a plated through-hole for solderless backplane assembly or wave-soldered for a traditional board connection. Press-fit avoids thermal stress on the board and is preferred in high-reliability or rework-friendly designs.
The housing material is UL94 V-0 rated nylon 6/6, glass filled, and the part is ROHS3 compliant.
Mates with Grace Inertia GIC receptacle
The 7.92mm pitch and 2-position layout are specific to this series; confirm the receptacle part number against your harness design before committing the BOM.