3.30mm Pitch, 4-Position, Dual-Row Layout
The through-hole termination uses kinked pins with a 0.118" (3.00mm) post length, which gives a solid solder joint on standard 1.6mm PCBs.
Rated Voltage and Temperature Envelope
The UL94 V-0 glass-filled PA66 housing handles the thermal and flame requirements for industrial control panels and general-purpose equipment inside an enclosure.
Mating Half and Build-to-Print Checklist
The mating half is a Grace Inertia receptacle housing with the same 3.30mm pitch and latch holder feature. The build-to-print BOM needs the header, the matching receptacle, and the crimp terminals for the wire side — the header itself is a pin header only, with no wire-entry seals.