5.00 mm pitch, 2-position header with latch holder
The latch holder fastening type gives positive retention against cable pull and vibration — a practical choice for wire-to-board connections in equipment that sees movement or shock.
Glow wire compliance and UL94 V-0 housing
The natural insulation colour makes visual inspection of seating and solder joints straightforward. The tin-plated brass contacts are rated for the full temperature range without derating at the lower end.
Termination is solder through-hole, with a post length of 0.138" (3.50 mm) — this suits standard 1.6 mm thick PCBs with enough protrusion for a reliable solder fillet. The header mates with a corresponding 5.00 mm pitch crimp receptacle housing (TE part family 2232532).