TE Connectivity AMP Connectors Mini CT series, Board to Cable/Wire header, 14 positions, 1.50 mm pitch, single row, shrouded, through-hole, tin-plated male pins, detent lock, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | Mini CT |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Detent Lock |
| Voltage rating | 50VAC |
| Current rating | Varies by Wire Gauge |
| Operating temperature | -30°C ~ 105°C |
| Contact material | Brass |
| Insulation color | Black |
| Insulation height | 0.272\" (6.91mm) |
| Insulation material | Polyamide (PA), Nylon, Glass Filled |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tray |
| Features | Board Guide |
| Shrouding | Shrouded - 4 Wall |
| Termination | Kinked Pin, Solder |
| Applications | General Purpose |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.059\" (1.50mm) |
| Positions | 14 |
| Contact finish - post | Tin |
| Contact length - post | 0.118\" (3.00mm) |
| Overall contact length | 0.307\" (7.80mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.094\" (2.40mm) |
| Contact finish thickness - mating | 39.4µin (1.00µm) |
At 1.50 mm pitch, this header demands a tight board layout — trace fan-out between the through-hole pads is feasible on a two-layer board if the traces are kept to 0.20 mm width. The 0.118 inch (3.00 mm) post length gives enough solder tail for a standard 1.6 mm PCB thickness. That mating pin reach is enough to engage the receptacle contact beam fully, but tight for applications requiring a long wipe before lock.
The mating pitch is 0.059 inch (1.50 mm). This is the center-to-center spacing between adjacent pins in the single row.
It is shrouded — a four-wall shroud surrounds the male pins, protecting them from damage during handling and blind mating. The shroud also helps guide the receptacle into alignment.