2-position 3.96mm shrouded header for wire-to-board power links
The shrouded design with one wall provides basic polarization and pin protection during handling, while the friction lock keeps the mating receptacle from backing off under vibration — a half-turn loose is a dropout, but this latch holds firm.
Voltage and current: 600VAC, but current depends on your wire
The voltage rating is 600VAC, which covers most machine-tool and panel-level voltages. For a 20 AWG wire, expect around 5-6A per contact; for 18 AWG, up to 7-8A, but always check the terminal datasheet for the derating curve.
The header mounts vertically through-hole, with a contact length - post of 0.125" (3.18mm) — a standard solder-tail length for 1.6mm thick PCBs.