Board-to-Wire Header for Power and Signal
The 350585-4: The 6.35mm pitch gives generous space for routing and keeps per-contact current capacity higher than finer-pitch alternatives — expect a solid 5 A or more per circuit depending on wire gauge and ambient temperature, though the exact ceiling depends on the mating receptacle and terminal selected.
With a 6.35mm pitch and 0.250" row spacing, the 3-row layout requires a board footprint that accommodates the staggered pin pattern. For applications requiring higher flame resistance (V-0 or V-1), check the series for alternate housing materials.
Mating and Termination Compatibility
This header mates with Universal MATE-N-LOK receptacle housings (cable side) that accept crimp terminals. Termination is solder-only for the header side — the through-hole tails are designed for wave or hand soldering. No press-fit option is available for this variant.
Lifecycle and Sourcing Position
RoHS compliance is confirmed, so it meets the European Union directive on hazardous substances. No other regulatory approvals (UL, CSA) are explicitly listed in the available records, but the UL94 V-2 rating on the housing material indicates the nylon compound is tested for flammability.