TE Connectivity AMPMODU Mod II unshrouded breakaway header, 39 positions, single row, 0.100" (2.54mm) pitch, through-hole solder termination, gold-plated mating contacts, 3 A rated, UL94 V-0 black thermoplastic housing.
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C~105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.090\" (2.29mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 39 |
| Contact finish - post | Tin-Lead |
| Contact length - post | 0.120\" (3.05mm) |
| Overall contact length | 0.440\" (11.18mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
This mates with standard AMPMODU Mod II receptacles and IDC sockets that accept the same pitch and pin geometry. Because the header is unshrouded, the pins are exposed after mating — the receptacle provides all polarisation and strain relief. Board-level alignment must be precise to avoid pin stubbing during assembly.
Verify your assembly's exemption status before committing the BOM line.
The contact finish on the post is tin-lead, which is not RoHS compliant for lead content. Check your assembly's exemption status before committing the BOM line.