TE Connectivity AMPMODU Mod II header, breakaway, 60 positions, dual-row, 0.100" (2.54 mm) pitch, unshrouded male pins, through-hole solder termination, gold mating finish, UL94 V-0 black thermoplastic housing.
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C~105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.090\" (2.29mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 60 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin-Lead |
| Contact length - post | 0.120\" (3.05mm) |
| Overall contact length | 0.440\" (11.18mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
The tin-lead post finish (100.0 µinch) solders reliably into plated through-holes. Push-pull fastening means no locking latch; in high-vibration environments, a separate retention method (adhesive or mechanical clamp) should be considered.
For a board-to-board stack, the mating length sets the minimum clearance between parallel PCBs — the mating receptacle must have a matching depth to fully engage the pins.
The dual-row spacing matches standard 0.100" grid receptacles.
No official pin-compatible alternative or second source is listed for this specific order code. The AMPMODU Mod II series includes many 0.100" pitch breakaway headers, but position count, plating, and post length vary — confirm the BOM match against the full spec table before substituting.