TE Connectivity AMP Connectors AMPMODU Mod II header, breakaway, 19 positions, 0.100" (2.54 mm) pitch, unshrouded, through-hole solder termination, gold mating finish, 3 A rating.
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.090\" (2.29mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 19 |
| Contact finish - post | Tin-Lead |
| Contact length - post | 0.120\" (3.05mm) |
| Overall contact length | 0.440\" (11.18mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The gold mating finish (30.0 µinch) on the square pins handles repeated connect-disconnect cycles without surface oxidation.
The push-pull fastening keeps insertion force low for bench-level assembly.
Contact base is copper alloy with tin-lead post finish (100.0 µinch) and gold mating surface. RoHS compliance status should be verified against the specific date code — the tin-lead post finish may restrict use in fully RoHS-exempt assemblies.
No official successor or cross-reference from TE Connectivity for this exact breakaway variant. The AMPMODU Mod II series includes other position counts, but a 19-position unshrouded header with gold finish has no listed pin-compatible alternative in the same series.
Any standard 0.100-inch (2.54 mm) pitch receptacle that accepts 0.025-inch square posts. AMPMODU Mod II socket housings are a direct match, but industry-standard receptacles with the same pitch and post size will work.
The contact post finish is tin-lead (100.0 µinch), which may not meet RoHS requirements for lead content. Verify compliance against your specific application date code and exemption status.