TE Connectivity AMPMODU Mod II, Header, Breakaway, 33 Positions, 0.100" (2.54mm) Pitch, Unshrouded, Through Hole, Solder, Tin-Lead Plating, 3A, UL94 V-0
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C~105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.090\" (2.29mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 33 |
| Contact finish - post | Tin-Lead |
| Contact length - post | 0.120\" (3.05mm) |
| Overall contact length | 0.440\" (11.18mm) |
| Contact finish - mating | Tin-Lead |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 100.0µin (2.54µm) |
That saves board space but demands the mating half be aligned by hand or by the receptacle's own shroud.
Tin-lead is a legacy plating — it mates well with tin or tin-lead receptacles but will show higher contact resistance over many cycles compared to gold. For a breakaway header that mates once and stays, it is a cost-effective choice.
No stock-holding claim is made — each request is quoted individually.
Unshrouded — the pins are exposed with no plastic shroud around them. This is a breakaway header meant to mate with a shrouded receptacle or IDC socket that provides its own alignment.