TE Connectivity AMPMODU Mod II unshrouded breakaway header, 9 positions, 0.100" (2.54 mm) pitch, through-hole solder termination, tin-lead plated phosphor bronze contacts, rated 3 A, UL94 V-0 black thermoplastic housing.
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C~105°C |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.090\" (2.29mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 9 |
| Contact finish - post | Tin-Lead |
| Contact length - post | 0.090\" (2.29mm) |
| Overall contact length | 0.410\" (10.41mm) |
| Contact finish - mating | Tin-Lead |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 100.0µin (2.54µm) |
The 4-103741-0-09: No official replacement part number is listed on the ledger.
This unshrouded header supports both board-to-board stacking and wire-to-board connections, depending on the mating receptacle.
The through-hole solder termination provides mechanical strength for cable strain, while the breakaway construction allows snapping to custom lengths if needed.
The Last Buy status means quantities are limited and lot-specific.
No official replacement part number is recorded. For a pin-compatible alternative, look for other AMPMODU Mod II unshrouded headers with 9 positions and 0.100" pitch—confirm the contact finish and overall length match your application.