TE Connectivity AMP MTA-100 unshrouded header, 14 positions, 0.100" (2.54 mm) pitch, tin-plated square pins, through-hole solder termination, natural thermoplastic housing, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | MTA-100 |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Voltage rating | 250VAC |
| Current rating | Varies by Wire Gauge |
| Operating temperature | -55°C ~ 105°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.100\" (2.54mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Applications | General Purpose |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 14 |
| Contact finish - post | Tin |
| Contact length - post | 0.110\" (2.79mm) |
| Overall contact length | 0.505\" (12.83mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.295\" (7.49mm) |
| Contact finish thickness - post | 150.0µin (3.81µm) |
| Contact finish thickness - mating | 150.0µin (3.81µm) |
Through-hole solder termination and a natural thermoplastic housing rated UL94 V-0 make it a standard fit for wave-solder assembly on single-sided or double-sided boards.
For a typical 22-24 AWG wire, expect 3-5 A per contact at 30°C rise. Voltage rating is 250 VAC, which is standard for signal-level and low-power distribution inside an enclosure.
The pitch is 0.100" (2.54 mm), which is the standard MTA-100 pitch matching IDC ribbon cable and the mating receptacle housings.
No, this is an unshrouded header — it does not have a locking latch.