14-position dual-row 3.00 mm pitch header
The 4-794620-4: This is a 14-position, dual-row, right-angle header from the Micro MATE-N-LOK series, designed for board-to-cable/wire applications. The shrouded 4-wall design protects the male pins during handling and guides the receptacle into alignment, reducing the risk of bent contacts during mating.
Locking ramp and board lock for vibration resistance
This positive lock prevents the connector from backing out under cable strain or vibration, a common failure point in unlatched headers. The integrated board lock anchors the header to the PCB during soldering and provides additional mechanical retention against shear forces from the cable assembly.
Gold mating finish for repeated connect cycles
In a field-service application where the connector is cycled quarterly, that translates to decades of service life at the contact interface. The solder tails are tin-plated (100 µinch) for reliable soldering to the PCB, while the gold mating face stays corrosion-resistant.