10-position SMT header for board-to-wire harness
The 4-794625-0 is a 10-circuit, 2-row header from TE's Micro MATE-N-LOK series, pitched at 3.00 mm on both the mating and row spacing. It terminates by solder to the PCB and is oriented right-angle, meaning the mated cable exits parallel to the board — a common choice for edge-mounted harnesses where z-height above the PCB is tight. The housing is shrouded on all four walls, which protects the male pins from bent-contact damage during blind mating. A locking ramp on the top surface engages with the mating receptacle's latch — the audible click confirms the pair is seated and stays mated under vibration up to the series' rated duty.
Gold mating finish and 250 V rating
The male pins are brass with a gold mating finish of 15.0 µinch (0.38 µm) over nickel. The solder tails are tin-plated at 100.0 µinch (2.54 µm). The voltage rating is 250 V.