It carries 14 circuits across two rows at 0.118" (3.00 mm) pitch — the same pitch as the mating receptacle, so the board footprint matches the harness connector directly. A full 4-wall shroud surrounds the male pins, protecting them during handling and guiding the mating receptacle into alignment. In a harness build where the connector is routinely unmated for panel access, the board lock keeps the solder joints from fatiguing.
Tin-plated contacts and current rating
In practice, with 20 AWG wire the contact can carry about 5 A per circuit at 30 °C rise; derate for higher ambient temperatures up to the 105 °C operating limit.