Skip to main content
Log in
TE Connectivity AMP Connectors 440053-6 — Pin Headers

440053-6 TE Connectivity 2.5mm Right-Angle Header 6-Pin

MPN440053-6
Active

TE Connectivity AMP Connectors HPI series, 440053-6, Board to Cable/Wire header, 6 positions, 2.50mm pitch, single row, right-angle through-hole, shrouded 3-wall, friction lock, press-fit or solder termination, 3A, 250V, UL94 V-0.

$0.7300Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 440053-6 datasheet (PDF)
RoHSROHS3 Compliant
SeriesHigh Performance Interconnect (HPI)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Aug 2026

Specifications

440053-6 key specifications
ParameterValue
SeriesHigh Performance Interconnect (HPI)
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader
Fastening typeFriction Lock
Voltage rating250V
Current rating3A
Operating temperature-25°C ~ 85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.165\" (4.20mm)
Insulation materialPolyamide (PA66), Nylon 6/6

All specifications

440053-6 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 3 Wall
TerminationPress-Fit, Solder
ApplicationsAutomotive, General Purpose, Industrial, Medical
Contact shapeSquare
Rows1
Pitch0.098\" (2.50mm)
Positions6
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin
Contact length - mating0.157\" (4.00mm)

Product details

Why the 440053-6 fits a 6-position wire-to-board BOM

The 440053-6 is a 6-position, single-row, right-angle header on 2.50mm pitch from TE's High Performance Interconnect (HPI) series. Rated 3A per contact at 250V with tin-on-tin contacts, it handles signal-level loads in automotive, industrial, medical, and general-purpose equipment.

Termination and mounting: press-fit or solder

The spec lists both Press-Fit and Solder termination — the pin tail can be pressed into a plated through-hole without solder, or wave-soldered if the assembly line prefers.

Frequently asked questions

What is the mating connector for 440053-6?

The 440053-6 mates with a 2.50mm-pitch single-row crimp receptacle housing from the same HPI series. The friction lock on the header engages with a corresponding ramp on the receptacle. Confirm the receptacle part number against your wire gauge and terminal type.