2.00 mm pitch right-angle header for board-edge harnesses
The 440055-3: Three positions in a single row keep the footprint compact — typical for sensor, limit-switch, or low-pin-count I/O harnesses in automotive, industrial, and medical equipment.
Tin-plated contacts and shrouded 3-wall housing
Press-fit and solder termination for through-hole assembly
Termination listed as press-fit, solder — the press-fit compliant pin allows solderless insertion into plated through-holes, with the option to solder for additional mechanical retention in high-vibration environments. Contact length - mating is 0.138" (3.50 mm) — the pin extension into the receptacle ensures full wipe on the mating contact.
ROHS3 Compliant; bulk packaging.
How this header compares to similar 2 mm-pitch siblings
Against the CT series 1-292164-1 (11 positions, 2.00 mm pitch, 4-wall shrouding, detent lock), the 440055-3 carries fewer circuits and uses a 3-wall shroud without a locking ramp — suited for lower-pin-count, non-latching harnesses. Against the.025 series 1376366-8 (8 positions, 2.20 mm pitch, 5 A rating, latch holder), the 440055-3 runs a tighter pitch and lower current ceiling — 3 A vs 5 A — so it fits signal-only duty where the.025 series carries higher power.