0.100" Pitch, Right-Angle Breakaway Header — 14 Circuits, Gold Contacts
The header is unshrouded with push-pull fastening — there is no locking latch or polarization key.
Board Fit and Mating Dimensions
Together these set the mated stack height and the clearance needed for the receptacle housing — a standard AMPMODU Mod II receptacle will sit at roughly 0.556" above the board surface. Row spacing is also 0.100" (2.54 mm), so the 14 positions occupy a 7 x 2 grid that fits a standard 0.100" footprint.
The base product number is 102975 — this header is one variant in a family that shares the same insulator and contact geometry, differing only in position count and plating.
The housing is black thermoplastic rated UL94 V-0 — the connector will not propagate flame inside an enclosure.