TE Connectivity AMPMODU Mod II, 5-103080-2, shrouded 4-wall header, 4 positions, 0.100" (2.54 mm) pitch, through-hole solder termination, tin-plated male pins, rated 3 A, push-pull fastening.
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C~105°C |
| Contact material | Brass |
| Insulation color | Black |
| Insulation height | 0.549\" (13.94mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Tube |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 4 |
| Contact finish - post | Tin |
| Contact length - post | 0.130\" (3.30mm) |
| Overall contact length | 0.589\" (14.96mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.240\" (6.10mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 100.0µin (2.54µm) |
The 5-103080-2: It is not intended for high-cycle or corrosive-exposure duty — the tin finish will wear and oxidize under repeated connect/disconnect in field-service conditions.
In a vibration-prone installation, a locking-latch sibling (e.g., 1394090-1 with its latch holder) would provide more positive retention. The 4 positions are fully loaded — no empty slots.
For sourcing buyers to quickly check cost and stock before purchasing.
Design engineers need to verify fit, pinout, and electrical specs for their board design.
Engineers and prototype builders often need low volume without minimum order restrictions.
Brokers and maintenance techs must know lifecycle status to plan replacements or sourcing.
Ensures compatibility with receptacles or sockets for proper connection.
Allows buyers to find alternative parts if this one is unavailable or too expensive.